Shopping on line can be easy, simple and save you lots of money. It can also take a lot of your time, frustrate you, and result in unwanted purchases. Now the same can be said for regular high street shopping, but with the vast opportunity presented by the Internet it will pay you to spend a few minutes reading this and understanding how to better optimize your Electrolysis Of Water shopping experience:
1. Compare - without doubt the biggest advantage that the Electrolysis Of Water offers shoppers today is the ability to compare thousands of Electrolysis Of Water at a time. This is a great thing, but not necessarily all the time! Too much can be daunting at times so take advantage of the great comparison sites and where possible let them do the hard work for you.
2. Research - if it has been said it will be on the internet. Ignorance is no longer a justifiable reason for buying the wrong thing. Take the time to research in detail everything that you could possible want to know about
3. Testimonials - don't know anybody that has bought a Electrolysis Of Water? Wrong! If the Electrolysis Of Water is good the internet will let you know. Use the Internet as a friend and get testimonials before you buy.
4. Questions - Got a question about Electrolysis Of Water then search the Forums, FAQ's, Blogs etc. Don't be afraid to ask .....
5. Reputation - Never heard of the company selling Electrolysis Of Water? Don't worry, no reason why you should know every company in the world, but you know someone that does! Use the internet to find out what people are saying about Electrolysis Of Water and build up a picture of their reputation for sales, returns, customer service, delivery etc.
6. Returns - still worried that even after all of the above your Electrolysis Of Water wont be what you want? Check out the returns policy. There is so much competition now that someone, somewhere is bound to offer the terms that you are comfortable with.
7. Feedback - happy with your Electrolysis Of Water then let people know, after all you are depending on others people input in your buying decision, so why not give a little back.
8. Security - check for the yellow padlock on the Electrolysis Of Water site before you buy, and the s after http:/ /i.e. https:// = a secure site
9. Contact - got a question about Electrolysis Of Water, or want to leave a comment then check out the sites contact page. Reputable companies have them and respond.
10. Payment - ready to pay for your Electrolysis Of Water, then use your credit card or PayPal! Be aware of companies that don't accept them, there may be genuine reasons but given the huge amount of choice you have when buying online there is no reason at all not to buy via credit card or PayPal.
used to electrolyze water.
Electrolysis of water is the decomposition of
water (H2O) into oxygen (O2) and hydrogen gas (H2) due to an electricity being passed through the water. This
electrolysis is used in some industrial applications when hydrogen is needed.
An electrical power source is connected to two electrodes, or two plates, (typically made from some inert metal such as
platinum or
stainless steel) which are placed in the water.Hydrogen will appear at the cathode (the positively charged electrode, where
electrons are pumped into the water), and oxygen will appear at the
anode (the negatively charged electrode). The generated amount of hydrogen is twice the amount of oxygen, and both are
proportional to the total
electrical charge that was sent through the water.
Electrolysis of
pure water is very slow; it is sped up dramatically by adding an electrolyte (such as a salt, an acid or a
base (chemistry)).
Equations
In the water at the negatively charged cathode, a
redox reaction takes place, with electrons (e−) from the cathode being given to hydrogen cations to form hydrogen gas:
Cathode (reduction): 2
water(l) + 2e− → (g) + 2(aq); reduction potential=−0.83 V
At the positively charged anode, an redox reaction occurs, generating oxygen gas and giving electrons to the anode to complete the circuit:
Anode (oxidation): 2
water(l) → (g) + 4(aq) + 4e−; E0=−1.23 V
Combining these two reactions yields the overall decomposition of water into oxygen and hydrogen:
Overall reaction: 2
water(l) → 2(g) + (g)
The number of hydrogen molecules produced is thus twice the number of oxygen molecules. Assuming equal temperature and pressure for both gases, the produced hydrogen gas has therefore twice the volume of the produced oxygen gas. The number of electrons pushed through the water is twice the number of generated hydrogen molecules and four times the number of generated oxygen molecules.
The reactions are not spontaneous as is seen from theirn reduction potentials; the necessary energy is supplied by the electrical power source. Switched-mode power supply.
Electrolyte selection
If the above described processes occur in pure water, H+ cations will accumulate at the anode and OH− anions will accumulate at the cathode. This can be verified by adding a pH indicator to the water: the water near the anode is acidic while the water near the cathode is basic. These charged ions will repel the further flow of electricity until they have diffusion away, a slow process. This is why pure water conducts electricity poorly and why electrolysis of pure water proceeds slowly.
If a water-soluble
electrolyte is added, the conductivity of the water rises considerably. The electrolyte disassociates into
cations and anions; the anions rush towards the anode and neutralize the buildup of positively charged H+ there; similarly, the cations rush towards the cathode and neutralize the buildup of negatively charged OH− there. This allows the continued flow of electricity.Linus Pauling,
General Chemistry, Section 15-2. San Francisco, 1970
Care must be taken in choosing an electrolyte, since an
anion from the electrolyte is in competition with the hydroxide ions to give up an electron. An electrolyte
anion with less standard electrode potential than hydroxide will be oxidized instead of the hydroxide, and no oxygen gas will be produced. A
cation with a greater
standard electrode potential than a hydrogen ion will be reduced in its stead, and no hydrogen gas will be produced.
The following cations have lower electrode potential than H+ and are therefore suitable for use as electrolyte cations:
Lithium+,
Rubidium+,
Potassium+,
Caesium+,
Barium2+, Strontium2+, Calcium2+, Sodium+, and Magnesium2+.
Sodium and
lithium are frequently used, as they form inexpensive, soluble salts.
If an acid is used as the
electrolyte, the cation is H+, and there is no competitor for the H+ created by disassociating water.
The most commonly used anion is sulfate (SO42-), as it is very difficult to oxidize, with the standard potential for oxidation of this ion to the peroxydisulfate ion being −0.22 volts.
Strong acids such as
Sulphuric acid (H2SO4), and strong bases such as potassium hydroxide (KOH), and sodium hydroxide (NaOH) are frequently used as electrolytes.
Techniques
Fundamental Demonstration
Two wire, running from the terminals of a battery, are placed in a cup of water with a quantity of electrolyte added to establish conductivity. Hydrogen and Oxygen gases will stream from the oppositely charged
electrode. Oxygen will collect at the anode and hydrogen will collect at the
cathode.
Hofmann voltameter
The Hofmann voltameter is often used as a small-scale electrolytic cell. It consists of three joined upright cylinders. The inner cylinder is open at the top to allow the addition of
water and the
electrolyte. A
platinum electrode is placed at the bottom of each of the two side cylinders, connected to the positive and negative terminals of a source of electricity. When current is run through the hofmann voltameter, gaseous oxygen forms at the
anode and gaseous hydrogen at the cathode. Each gas displaces water and collects at the top of the two outer tubes, where it can be drawn off with a stopcock.
Industrial electrolysis
Many industrial electrolysis cells are very similar to Hofmann voltameters, with complex platinum plates or honeycombs as electrodes. Hydrogen gas is usually created and collected on site for use in other chemical processes, although in case of refineries it then makes more sense to produce it from natural gas. It can also be produced as a by-product, for example in brine electrolysis.
High-temperature electrolysis
High-temperature electrolysis (also HTE or steam electrolysis) is a method currently being investigated for water electrolysis with a
heat engine. High temperature electrolysis is more efficient than traditional room-temperature electrolysis because some of the energy is supplied as heat, which is cheaper than electricity, and because the electrolysis reaction is more efficient at higher temperatures.
Applications
About four percent of hydrogen gas produced worldwide is created by electrolysis, and normally used on site. Hydrogen is used for the creation of ammonia for fertilizer via the Haber process, and for converting heavy petroleum sources to lighter fractions via hydrocracking.
There is some speculation about future development of hydrogen as an energy carrier in a
hydrogen economy, although the rapid evolution of electric
battery (electricity) technology makes overall efficiency a major consideration. Hydrogen fuel injection is a concept having a long history; its popularity has reemerged in recent years.
Efficiency
Water electrolysis does not convert 100% of the electrical energy into the chemical energy of hydrogen. The process loses energy because ions in the water need to move to carry electricity, and this movement ultimately heats up the water.
The energy efficiency of water electrolysis varies widely. Some report 50–70%, while others report 80–94%.These values refer only to the efficiency of converting electrical energy into hydrogen's chemical energy. The energy lost in generating the electricity is not included. For instance, when considering a power plant that converts the heat of nuclear reactions into hydrogen via electrolysis, the total efficiency may be closer to 25–45%.
See also
References
used to electrolyze water.
Electrolysis of water is the decomposition of water (H2O) into oxygen (O2) and hydrogen gas (H2) due to an
electricity being passed through the water. This electrolysis is used in some industrial applications when hydrogen is needed.
An electrical power source is connected to two
electrodes, or two plates, (typically made from some inert metal such as platinum or stainless steel) which are placed in the water.Hydrogen will appear at the cathode (the positively charged electrode, where electrons are pumped into the water), and oxygen will appear at the
anode (the negatively charged electrode). The generated amount of hydrogen is twice the amount of oxygen, and both are proportional to the total
electrical charge that was sent through the water.
Electrolysis of
pure water is very slow; it is sped up dramatically by adding an electrolyte (such as a salt, an
acid or a base (chemistry)).
Equations
In the water at the negatively charged cathode, a
redox reaction takes place, with electrons (e−) from the cathode being given to hydrogen cations to form hydrogen gas:
Cathode (reduction): 2
water(l) + 2e− → (g) + 2(aq);
reduction potential=−0.83 V
At the positively charged anode, an
redox reaction occurs, generating oxygen gas and giving electrons to the anode to complete the circuit:
Anode (oxidation): 2water(l) → (g) + 4(aq) + 4e−; E0=−1.23 V
Combining these two reactions yields the overall decomposition of water into oxygen and hydrogen:
Overall reaction: 2water(l) → 2(g) + (g)
The number of hydrogen molecules produced is thus twice the number of oxygen molecules. Assuming equal temperature and pressure for both gases, the produced hydrogen gas has therefore twice the volume of the produced oxygen gas. The number of electrons pushed through the water is twice the number of generated hydrogen molecules and four times the number of generated oxygen molecules.
The reactions are not spontaneous as is seen from theirn reduction potentials; the necessary energy is supplied by the electrical power source.
Switched-mode power supply.
Electrolyte selection
If the above described processes occur in pure water, H+
cations will accumulate at the anode and OH− anions will accumulate at the cathode. This can be verified by adding a pH indicator to the water: the water near the anode is acidic while the water near the cathode is basic. These charged ions will repel the further flow of electricity until they have
diffusion away, a slow process. This is why pure water conducts electricity poorly and why electrolysis of pure water proceeds slowly.
If a water-soluble
electrolyte is added, the conductivity of the water rises considerably. The electrolyte disassociates into cations and anions; the anions rush towards the anode and neutralize the buildup of positively charged H+ there; similarly, the cations rush towards the cathode and neutralize the buildup of negatively charged OH− there. This allows the continued flow of electricity.
Linus Pauling,
General Chemistry, Section 15-2. San Francisco, 1970
Care must be taken in choosing an electrolyte, since an
anion from the electrolyte is in competition with the hydroxide ions to give up an electron. An electrolyte anion with less standard electrode potential than hydroxide will be oxidized instead of the hydroxide, and no oxygen gas will be produced. A
cation with a greater
standard electrode potential than a hydrogen ion will be reduced in its stead, and no hydrogen gas will be produced.
The following cations have lower electrode potential than H+ and are therefore suitable for use as electrolyte cations:
Lithium+, Rubidium+, Potassium+,
Caesium+,
Barium2+,
Strontium2+,
Calcium2+, Sodium+, and Magnesium2+.
Sodium and lithium are frequently used, as they form inexpensive, soluble salts.
If an acid is used as the electrolyte, the cation is H+, and there is no competitor for the H+ created by disassociating water.
The most commonly used anion is sulfate (SO42-), as it is very difficult to oxidize, with the standard potential for oxidation of this ion to the peroxydisulfate ion being −0.22 volts.
Strong acids such as
Sulphuric acid (H2SO4), and strong bases such as potassium hydroxide (KOH), and sodium hydroxide (NaOH) are frequently used as electrolytes.
Techniques
Fundamental Demonstration
Two wire, running from the terminals of a battery, are placed in a cup of water with a quantity of electrolyte added to establish conductivity. Hydrogen and Oxygen gases will stream from the oppositely charged
electrode. Oxygen will collect at the anode and hydrogen will collect at the cathode.
Hofmann voltameter
The Hofmann voltameter is often used as a small-scale electrolytic cell. It consists of three joined upright cylinders. The inner cylinder is open at the top to allow the addition of water and the
electrolyte. A platinum electrode is placed at the bottom of each of the two side cylinders, connected to the positive and negative terminals of a source of electricity. When current is run through the hofmann voltameter, gaseous oxygen forms at the anode and gaseous
hydrogen at the
cathode. Each gas displaces water and collects at the top of the two outer tubes, where it can be drawn off with a stopcock.
Industrial electrolysis
Many industrial electrolysis cells are very similar to
Hofmann voltameters, with complex platinum plates or honeycombs as electrodes.
Hydrogen gas is usually created and collected on site for use in other chemical processes, although in case of refineries it then makes more sense to produce it from natural gas. It can also be produced as a by-product, for example in brine electrolysis.
High-temperature electrolysis
High-temperature electrolysis (also HTE or steam electrolysis) is a method currently being investigated for water electrolysis with a heat engine. High temperature electrolysis is more efficient than traditional room-temperature electrolysis because some of the energy is supplied as heat, which is cheaper than electricity, and because the electrolysis reaction is more efficient at higher temperatures.
Applications
About four percent of hydrogen gas produced worldwide is created by electrolysis, and normally used on site. Hydrogen is used for the creation of ammonia for fertilizer via the Haber process, and for converting heavy
petroleum sources to lighter fractions via hydrocracking.
There is some speculation about future development of hydrogen as an energy carrier in a hydrogen economy, although the rapid evolution of electric battery (electricity) technology makes overall efficiency a major consideration.
Hydrogen fuel injection is a concept having a long history; its popularity has reemerged in recent years.
Efficiency
Water electrolysis does not convert 100% of the electrical energy into the chemical energy of hydrogen. The process loses energy because ions in the water need to move to carry electricity, and this movement ultimately heats up the water.
The energy efficiency of water electrolysis varies widely. Some report 50–70%, while others report 80–94%.These values refer only to the efficiency of converting electrical energy into hydrogen's chemical energy. The energy lost in generating the electricity is not included. For instance, when considering a power plant that converts the heat of nuclear reactions into hydrogen via electrolysis, the total efficiency may be closer to 25–45%.
See also
References
Electrolysis of water - Wikipedia, the free encyclopedia
Electrolysis of water is the decomposition of water (H 2 O) into oxygen (O 2) and hydrogen gas (H 2) due to an electric current being passed through the water.
Electrolysis - Wikipedia, the free encyclopedia
One important use of electrolysis of water is to produce hydrogen. 2H 2 O (l) → 2H 2(g) + O 2(g) This has been suggested as a way of shifting society toward using hydrogen as an energy ...
Electrolysis of Water
Electrolysis of Water. An electric current is passed through two cells containing sodium sulfate solution. At one electrode, gas is generated and the indicator color changes from ...
Electrolysis of Water and Fuel Cell Operation
Electrolysis of Water By providing energy from a battery, water (H 2 O) can be dissociated into the diatomic molecules of hydrogen (H 2) and oxygen (O 2).
Electrolysis of Water
Electrolysis of Water. Problem: How can you perform Electrolysis of water to produce Hydrogen and Oxygen? Research the Problem: Electrolisis is Chemical change, especially ...
NASA: Aquarius Mission Web Site - Education: Classroom Activities ...
Aquarius Mission Web Site - Education: Classroom Activities - Electrolysis of Salt Water - Understanding the interaction between ocean circulation, the water cycle and climate by ...
YouTube - Electrolysis of Water - Exploding Hydrogen
Rate: 123 ratings. Login to rate. Views: 80,255. Share: Favorite: Playlists: Flag: MySpace. Facebook. Digg (more share options) (fewer share options) This video will appear on your ...
Stoichiometry
Electrolysis of Water . Description: A Hoffman apparatus is used to electrolyze water (with some potassium sulfate added to increase conductivity).
Electrolysis of water | Practical Physics
Nuffield ... 4.Main Content experiments Electrolysis of water Demonstration. The production of hydrogen and oxygen from water.
Experiments: Electrochemistry III: Electrolysis of Water
P urpose: To study the electrolysis of water. M aterials: Electrolysis apparatus; Source of current; Electrodes; Two test tubes; Two rubber stoppers; Wooden splints; Ruler; 1M Na 2 ...
